• Sign In or Join Free
Your position: Home > All Products

VL6180X GY-6180 Time-of-Flight Distance Sensor GY6180/Optical Ranging Finder Sensor Module 2 orders

The VL6180X also drives this pin low when it is in hardware standby. This output is not level-shifted.
Item Code: ADM103
Wholesale Price:
5
$13.49
10
$12.89
20
$12.29
50
$11.79
100
$11.29
Shipping Cost:
to
Delivery:
Estimated between
Units
  • Description
Features:
2.8V Regulator - Provides the required 2.8V for the sensor
I2C Level Shifter - Provides logic level conversion from 2.8V to VCC
3-in-1 Module
IR Emitter
Range Sensor
Ambient Light Sensor
Measures absolute range up to 10cm
Gesture Recognition
I2C Interface
Two Programmable GPIO
Sharp Sensor Board Layout


Pinout Description:
VIN     This is the main 2.7 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I⊃2;C lines high to this level.
GND     The ground (0 V) connection for your power supply. Your I⊃2;C control source must also share a common ground with this board.
SDA/SDI/SDO     Level-shifted I⊃2;C data line: HIGH is VIN, LOW is 0 V
SCL/SPC     Level-shifted I⊃2;C clock line: HIGH is VIN, LOW is 0 V
GPIO0/CE     This pin is configured as a chip enable input on power-up of the VL6180X; the board pulls it up to VDD to enable the sensor by default. Driving this pin low puts the sensor into hardware standby. After the VL6180X powers up, this pin can be reconfigured as a programmable interrupt output (VDD logic level). This input/output is not level-shifted.
GPIO1    Programmable interrupt output (VDD logic level). The VL6180X also drives this pin low when it is in hardware standby. This output is not level-shifted.
Customer Reviews
Average rating:

Product reviews can be carried out after the member login, please click here to login
TOP