10pcs NRF24L01+ 2.4GHz Wire Less RF Transceiver Module New Compatible with Arduino

Description

nRF24L01 is a single chip radio transceiver for the worldwide 2.4 - 2.5 GHz ISM band. Compatible with Arduino and Raspberry Pi.
Applications: wire less peripherals, remote control systems such as RC vehicles and consumer remote electronics, wire less voice transmission suchtra small: 15x29mm (including:built-in 2.4GHz antenna),for easy implementation into designs without additional hardware
Auto-acknowledge and auto-retransmit function
You can find several resources available online easily,such as tutorials, data sheets, and notes.

Specification:
* 100% Quality Guarantee;
* Model:NRF24L01;
* nRF24L01 is a single chip radio transceiver for the world wide 2.4 - 2.5 GHz ISM band.
* The transceiver consists of a fully integrated frequency synthesizer, a power amplifier, a crystal oscillator, a demodulator, modulator and Enhanced ShockBurst protocol engine.
* Output power, frequency channels, and protocol setup are easily.
* programmable through a SPI interface. Current consumption is very low, only 9.0mA at an output power of -6dBm and 12.3mA in RX mode.
* Built-in Power Down and Standby modes makes power saving easily realizable.
* Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.
* 125 Communications channels, Multi-point communication and frequency hopping to meet the communication needs.
* Built-in hardware CRC error detection, Multipoint communication address control.
* Low-power 1.9 ~ 3.6V, only 1uA on Power down mode.
* Built-in 2.4Ghz antenna.
* Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.
* Support 6 Data channels of data reception.
* Standard DIP Pitch Interface for embedded applications.

You will get:
10 pieces of NRF24L01 + 2.4GHz RF Wireless Transceiver Module

Please Note:
* Please check pictures for more details.
* Transceivers integrated module , transmit or receive can not be simultaneously by one module.
* If you have any questions during use, please feel free to contact our service personnel. We will do our best to give you a satisfactory answer.